HORIZONTAL DIRECTIONAL DRILLING
This innovative approach provides a flexible and efficient solution for situations where conventional open-cut methods are not feasible, environmentally or economically viable, or not permitted. HDD is particularly advantageous in densely populated urban areas, or where various obstacles, and difficult terrains, such as shore approaches, swamps, and river crossings, lie along the proposed route.
With HDD, the pipeline or cable land disturbance is only required at the entry and exit points, and the pipeline or conduit is installed seamlessly underneath the obstacle, minimizing environmental impact and maximizing efficiency.
APPLICATION
-
OFFSHORE: INSTALLING ELECTRICAL CABLES FROM SEA TO SHORE.
-
TRENCHLESS OIL AND GAS PIPELINES
-
OVERHEAD TRANSMISSION LINES
-
UNDERGROUN TELECOM AND CONNECTIVITY
Horizontal Directional Drilling Equipment Fleet
Most of our Drilling Rigs are from VERMEER USA.
| Rigs Model | Qty | Capacity |
|---|---|---|
| VERMEER D36x50 SREIS II HDD Rig | 5 | 16 ton thrust and Pull back |
| VERMEER D36x50 DR HDD Rig | 1 | 16 ton thrust and Pull back |
| VERMEER D40x55 SERIES 3 HDD Rig | 1 | 18 ton thrust and Pull back |
| VERMEER D40x55 DR SERIES 3 HDD Rig | 1 | 18 ton thrust and Pull back |
| VERMEER D100x120 SERIESII HDD Rig | 4 | 45 ton thrust and pull back |
| VERMEER D130X150 SERIESII HDD Rig | 1 | 65 ton thrust and pull back |
| VERMEER D220X300 SERIES 3 HDD Rig | 1 | 110 ton thrust and pull back |
| VERMEER D330x500 SERIESII HDD Rig | 1 | 151 ton thrust and pull back |
| VERMEER D1320x900 HDD Rig | 1 | 660 ton thrust and pull back |
Our HDD Equipment Fleet
Thrust/Pullback: 1,328,000 lbs (664 Ton):
Max spindle torque: 99,400 lb ((134,768.3Nm):
Max spindle speed at max engine rpm: 57 rpm:
Max Carriage Speed at Max Engine rpm: 15.8 m/min Number of Drive Motors: 6 Mud Swivel: 3” (7.6cm) Breakout: Torque: 147,500 ft-lb: Inside Diameter: 10” (25.3 cm)
Clamp Force: 176,000 lb: Gross Horsepower: 1200 hp (895 kw): Hydraulic tank capacity: 720 gal
Thrust/Pullback: 38,000 lb (169 KN)
Max carriage speed: 116 ft. /min (35.4 m/min):
Max spindle torque: 6000 ft-lb (8134.9 Nm):
Max spindle speed at max engine rpm: 210
rpm Min bore diameter (rock): 3.5" (8.9 cm)
Min bend radius 6" (15.2 cm) | Automated rod loader: Yes| Max drill rack angle: 17.5° ( 1.5 % )
Thrust/Pullback: 40,000
lb ( 18 ton ) Max
carriage speed: 188 ft. /min (57.3 m/min) Max spindle torque: 5500 ft-lb (7457 Nm)
Max spindle speed at max engine: 227 rpm, Min bore diameter: 6" (15.2 cm)
Min bend radius 145' (44.2 m) Automated rod loader: Yes
Max drill rack angle: 17.5° ( 31.5 % )
Thrust/Pullback: 242,100 lb (110 Ton) | Max spindle torque: 30,750 ft-lb (41,691.4 Nm) | Max spindle speed at max engine rpm: 164 rpm
Max ground drive speed: 1.8 mph (2.9 km/hr.) Min bore diameter: 9.5" (241 mm )
Max bore diameter: 54" (1371 mm ) Min bend radius
300' (135 m) Automated rod loader: Yes
Drill rack angle: 13–18degrees
Thrust/Pullback: 100,000 lb (45 Ton)
Max spindle torque: 12,000 ft-lb (16,269.8 Nm)
Max spindle speed at max engine rpm: 120 rpm
Max ground drive speed: 3.2 mph (5.15 km/hr.) Min bore diameter: 5 " (127 mm )
Max bore diameter: 44 " (1117 mm ) Min bend radius 197.4' (60.2 m) Automated rod loader: Yes | Drill rack angle: 22 – 33 degrees
Thrust/Pullback: 130,000 lb (65 Ton)
Max spindle torque: 15,000 ft-lb (20,337 Nm) | Max
spindle speed at max engine rpm: 150 rpm
Max ground drive speed: 3.2 mph (5.15 km/hr.)
Min bore diameter: 5 " (127
mm )
Max bore diameter: 44 " (1117 mm ) Min bend radius 197.4' (60.2 m) | Automated rod loader: Yes | Drill rack angle: 22 – 33 degrees
Thrust/Pullback: 340,000 lbs (151 Ton)
Max spindle torque: 50,800 lb (67,791 Nm) | Max spindle speed at max engine rpm: 89 rpm | Max ground drive speed: 2.98 mph (4.8 km/hr.)
Min bore diameter: 9.5 " (241 mm ) | Max bore diameter: 64 " (1625 mm ) | Min bend radius 300' (135 m)
Automated rod loader: Yes
Drill rack angle: 13 – 18 degrees
Thrust/Pullback: 40,000 lb ( 18 Ton )
Max carriage speed: 115 ft. /min (35.1 m/min) Max spindle torque: 5500 ft-lb (7458 Nm)
Max spindle speed at max engine rpm: 199 rpm | Min bore diameter (rock): 6"
(15.2 cm) | Min bend radius: 169' (52 m)
Automated rod loader: Yes
Max drill rack angle: 17.5° ( 31.5 % )
Hydraulic Pipe Jacking Machines
| Machine Name | Qty | Capacity |
|---|---|---|
| Hydraulic Unit | 3 | |
| Pipe ramming Machine | 2 | Ramming force : 2200 ton |
| Hydraulic Jacking machine | 6 | Jacking force : 600 ton |
Truck Cranes
| Machine Name | Qty | Capacity |
|---|---|---|
| Truck Cranes | 2 | 50 Ton |
| Truck Cranes | 2 | 30 Ton |
Excavators
| Machine Name | Qty | Capacity |
|---|---|---|
| Excavator Hyundai with jack | 2 | 320 L |
| Excavator CAT without jack | 2 | 320 L |
| Excavator CAT with jack | 2 | 330 L |
| Excavator CAT with jack | 2 | 375 L |
Boom Trucks, Dum Truck & Others
| Machine Name | Qty | Capacity |
|---|---|---|
| Boom Truck | 4 | 5 Ton & 10 Ton |
| Dump Truck | 5 | 11 Ton - 25 Ton |
| Low Bed Trailer | 12 | |
| Bob Cat | 3 | |
| Wheel Loader CAT | 1 | 950 |
| Backhoe Loader | 12 | JCB 3cx |
| Road Roller | 3 | 25 Ton |
HDPE Pipe Dimension
