Everything you need to know about Horizontal directional drilling:  Technical terms and glossary included

Everything you need to know about Horizontal directional drilling: Technical terms and glossary included

Horizontal Directional Drilling (HDD) is a trenchless construction method used to install pipelines, cables and conduits with minimal surface disruption. The process begins with site planning and utility mapping, followed by drilling a pilot bore along a designed path. Locating systems guide the drill head to avoid existing utilities and obstacles. Once the pilot bore is complete, a backreamer enlarges the hole to the required diameter, and the product pipe or conduit is pulled back through the borehole.

LIFCON is a specialist HDD and trenchless contractor working in Saudi Arabia, Bahrain and Oman, with HDD crossings in soils and in hard rock. Below is a glossary of HDD tools, soil conditions and technical terms to help clients and engineers use the same language.

HDD Tools & Equipment Terms

Term & Alternate Terms Definition
Adapter (Sub, Crossover, Tailpiece) Adapter piece that allows drill bits and blades from one manufacturer to be used with another's starter rods, housings and other tooling.
Air Hammer Tool for boring through difficult rock using thrust, pressure and rotation to chip rock from the hole.
Backreamer (Reamer, Hole Opener, Expander) Cutting head on the leading end of the drill string that enlarges the pilot bore during pullback so the product pipe can be installed.
Barrel (Stabilizer, Pig, Centralizer) Cylindrical add-on tool that centres the reamer and stabilises the drill rod, reamer and product pipe.
Bentonite Natural clay with thixotropic properties, the basic ingredient of drilling muds.
Bit (Blade, Duck Bill, Drill Bit, Paddle, Steer Plate) Tool that excavates soil or rock and steers at the face of the bore, including slant-face, rock and percussive bits.
Breakout Wrench Manual or hydraulic tool used to connect or break tool joints forward of the drill rig.
Burp Hole Hole dug along the bore path to relieve downhole pressure and prevent inadvertent returns or hydro-lock.
Cuttings (Spoil, Slurry) Earth, rock and other material removed during drilling.
Detergent (Soap) Drilling-fluid additive that reduces clay balling and keeps tooling clean.
Drill Fluid (Mud Mix, Slurry) Mixture of water, bentonite and additives chosen for the soil and water conditions.
Drill Head (Housing, Transmitter Housing, Sonde Housing) Lead portion of the drill string; houses the transmitter and connects to blades and bits suited to the ground.
Drill Rig (Rig, Drill) Trenchless machine that drills a pilot bore, enlarges it and pulls back the product.
Drill Rod (Pipe) High-strength hollow steel pipe that transmits torque and thrust and carries drilling fluid to the downhole tools.
Duct Puller (Puller, Towing Head, Pull Head) Device that connects the duct or pipe to the pullback assembly.
Filter Cake Thin bentonite layer that seals the borehole wall and limits fluid loss.
Fly Cutter (Wagon Wheel) Reamer with an open blade configuration.
Hole Opener (Rock Reamer) Downhole tool with rolling cutters to enlarge holes in hard soil and rock.
Lowboy Semi-trailer with two drops in deck height for hauling large HDD equipment.
Mixing System Pumps, hoppers, mixers, hoses and tanks used to prepare drilling fluid.
Mud Motor Downhole tool that uses pressurised fluid to rotate the cutterhead in rock.
PDC Bit Polycrystalline Diamond Compact bit for rock, with high penetration rate and durability.
PDC Reamer PDC-equipped reamer for rock formations.
Pilot Bore (Pilot, Initial Bore) First steerable pass of drilling before backreaming.
Pipe Roller Roller bearings under the pipe to prevent drag before it enters the pit.
Receiver (Locator) Electronic device that detects signals from the transmitter to locate the drill head.
Receiving Pit (Exit Hole, Exit Pit) Pit where the bore emerges for product pullback.
Recycler (Reclaimer) Machine that separates solids from drilling fluid for reuse.
Remote Display (Monitor) Monitor on the rig showing drill head position.
Shackle (Anchor Shackle, Clevis) Connector between pulling grips and the swivel.
Starter Rod (Quick Connect, Transition Rod) Connector that allows quick changes of directional head or reamer.
Swivel (Pullback Swivel) Prevents the product pipe from rotating during pullback.
Transition Sub (Flex Sub) Connects drill pipe to the housing or reamer.
Transmitter (Beacon, Sonde, Probe) Sends location, pitch, roll, temperature and battery data to the receiver.
Vacuum (Sucker) Stand-alone unit for removing fluid and slurry from pits.
Strike Alarm Alerts the crew to a possible strike on an underground power line.

Soil Conditions

Term Definition
Bog Wetland that accumulates peat, often with mosses.
Caliche Hardened calcium carbonate cement binding gravel, sand, clay and silt.
Cobbles Rounded rock; usually pushed aside rather than cut.
Decomposed Granite Weathered granite that breaks easily into smaller pieces.
Gravel Loose rock fragments; difficult to drill without suitable tooling.
Hard Pan Firm layer of compacted material, such as clay, beneath softer soil.
Limestone Hard sedimentary rock of calcium carbonate or dolomite.
River Rock Water-smoothed rock with no sharp edges.
Running Sand Unstable sand below the water table, prone to liquefaction.
Sandstone Sedimentary rock of sand or quartz grains cemented together.
Shale Soft, layered sedimentary rock that splits easily.

HDD Technical Terms

Term Definition
Bearing Life Expected life of bearings before replacement.
Bend Radius Smallest radius a drill rod or product pipe can bend without damage.
Frac-out Inadvertent release of drilling fluid into the surrounding ground.
Gel Strength Ability of drilling fluid to suspend cuttings when circulation stops.
Hydrolock Condition where fluid pressure prevents pullback or forward movement of tooling.
Make-up Tightening of threaded connections between rods or tooling.
On-grade Drilling along a predetermined slope or elevation profile.
Pullback Force Pulling load applied to bring the product pipe through the bore path.
Torque Rotational force applied to the drill string.
Viscosity A fluid's resistance to flow, which affects its ability to carry cuttings.
Slope Incline or decline of the drill path, as a percentage or degree.

To discuss a project, contact us or email admin@lifcon.net.

Back to blog