Everything you need to know about Horizontal directional drilling: Technical terms and glossary included
Compartir
Horizontal Directional Drilling (HDD) is a trenchless construction method used to install pipelines, cables and conduits with minimal surface disruption. The process begins with site planning and utility mapping, followed by drilling a pilot bore along a designed path. Locating systems guide the drill head to avoid existing utilities and obstacles. Once the pilot bore is complete, a backreamer enlarges the hole to the required diameter, and the product pipe or conduit is pulled back through the borehole.
LIFCON is a specialist HDD and trenchless contractor working in Saudi Arabia, Bahrain and Oman, with HDD crossings in soils and in hard rock. Below is a glossary of HDD tools, soil conditions and technical terms to help clients and engineers use the same language.
HDD Tools & Equipment Terms
| Term & Alternate Terms | Definition |
|---|---|
| Adapter (Sub, Crossover, Tailpiece) | Adapter piece that allows drill bits and blades from one manufacturer to be used with another's starter rods, housings and other tooling. |
| Air Hammer | Tool for boring through difficult rock using thrust, pressure and rotation to chip rock from the hole. |
| Backreamer (Reamer, Hole Opener, Expander) | Cutting head on the leading end of the drill string that enlarges the pilot bore during pullback so the product pipe can be installed. |
| Barrel (Stabilizer, Pig, Centralizer) | Cylindrical add-on tool that centres the reamer and stabilises the drill rod, reamer and product pipe. |
| Bentonite | Natural clay with thixotropic properties, the basic ingredient of drilling muds. |
| Bit (Blade, Duck Bill, Drill Bit, Paddle, Steer Plate) | Tool that excavates soil or rock and steers at the face of the bore, including slant-face, rock and percussive bits. |
| Breakout Wrench | Manual or hydraulic tool used to connect or break tool joints forward of the drill rig. |
| Burp Hole | Hole dug along the bore path to relieve downhole pressure and prevent inadvertent returns or hydro-lock. |
| Cuttings (Spoil, Slurry) | Earth, rock and other material removed during drilling. |
| Detergent (Soap) | Drilling-fluid additive that reduces clay balling and keeps tooling clean. |
| Drill Fluid (Mud Mix, Slurry) | Mixture of water, bentonite and additives chosen for the soil and water conditions. |
| Drill Head (Housing, Transmitter Housing, Sonde Housing) | Lead portion of the drill string; houses the transmitter and connects to blades and bits suited to the ground. |
| Drill Rig (Rig, Drill) | Trenchless machine that drills a pilot bore, enlarges it and pulls back the product. |
| Drill Rod (Pipe) | High-strength hollow steel pipe that transmits torque and thrust and carries drilling fluid to the downhole tools. |
| Duct Puller (Puller, Towing Head, Pull Head) | Device that connects the duct or pipe to the pullback assembly. |
| Filter Cake | Thin bentonite layer that seals the borehole wall and limits fluid loss. |
| Fly Cutter (Wagon Wheel) | Reamer with an open blade configuration. |
| Hole Opener (Rock Reamer) | Downhole tool with rolling cutters to enlarge holes in hard soil and rock. |
| Lowboy | Semi-trailer with two drops in deck height for hauling large HDD equipment. |
| Mixing System | Pumps, hoppers, mixers, hoses and tanks used to prepare drilling fluid. |
| Mud Motor | Downhole tool that uses pressurised fluid to rotate the cutterhead in rock. |
| PDC Bit | Polycrystalline Diamond Compact bit for rock, with high penetration rate and durability. |
| PDC Reamer | PDC-equipped reamer for rock formations. |
| Pilot Bore (Pilot, Initial Bore) | First steerable pass of drilling before backreaming. |
| Pipe Roller | Roller bearings under the pipe to prevent drag before it enters the pit. |
| Receiver (Locator) | Electronic device that detects signals from the transmitter to locate the drill head. |
| Receiving Pit (Exit Hole, Exit Pit) | Pit where the bore emerges for product pullback. |
| Recycler (Reclaimer) | Machine that separates solids from drilling fluid for reuse. |
| Remote Display (Monitor) | Monitor on the rig showing drill head position. |
| Shackle (Anchor Shackle, Clevis) | Connector between pulling grips and the swivel. |
| Starter Rod (Quick Connect, Transition Rod) | Connector that allows quick changes of directional head or reamer. |
| Swivel (Pullback Swivel) | Prevents the product pipe from rotating during pullback. |
| Transition Sub (Flex Sub) | Connects drill pipe to the housing or reamer. |
| Transmitter (Beacon, Sonde, Probe) | Sends location, pitch, roll, temperature and battery data to the receiver. |
| Vacuum (Sucker) | Stand-alone unit for removing fluid and slurry from pits. |
| Strike Alarm | Alerts the crew to a possible strike on an underground power line. |
Soil Conditions
| Term | Definition |
|---|---|
| Bog | Wetland that accumulates peat, often with mosses. |
| Caliche | Hardened calcium carbonate cement binding gravel, sand, clay and silt. |
| Cobbles | Rounded rock; usually pushed aside rather than cut. |
| Decomposed Granite | Weathered granite that breaks easily into smaller pieces. |
| Gravel | Loose rock fragments; difficult to drill without suitable tooling. |
| Hard Pan | Firm layer of compacted material, such as clay, beneath softer soil. |
| Limestone | Hard sedimentary rock of calcium carbonate or dolomite. |
| River Rock | Water-smoothed rock with no sharp edges. |
| Running Sand | Unstable sand below the water table, prone to liquefaction. |
| Sandstone | Sedimentary rock of sand or quartz grains cemented together. |
| Shale | Soft, layered sedimentary rock that splits easily. |
HDD Technical Terms
| Term | Definition |
|---|---|
| Bearing Life | Expected life of bearings before replacement. |
| Bend Radius | Smallest radius a drill rod or product pipe can bend without damage. |
| Frac-out | Inadvertent release of drilling fluid into the surrounding ground. |
| Gel Strength | Ability of drilling fluid to suspend cuttings when circulation stops. |
| Hydrolock | Condition where fluid pressure prevents pullback or forward movement of tooling. |
| Make-up | Tightening of threaded connections between rods or tooling. |
| On-grade | Drilling along a predetermined slope or elevation profile. |
| Pullback Force | Pulling load applied to bring the product pipe through the bore path. |
| Torque | Rotational force applied to the drill string. |
| Viscosity | A fluid's resistance to flow, which affects its ability to carry cuttings. |
| Slope | Incline or decline of the drill path, as a percentage or degree. |
To discuss a project, contact us or email admin@lifcon.net.